Kat5200

[kat5200]

Emulated Systems: Atari 5200

Emulator last updated: 18/02/17

Current Official Version: 0.7.1

Installation

Download Locations

From Official Site

Operation

Hotkeys

User Keys (settings can be overidden in the GUI):

ESC - Quit the current emulation and go to GUI

ALT-F4 - Quit the program.

F1 - Enter debugger

ALT-ENTER - Toggle Fullscreen

ALT-s - Take screenshot

ALT-1 to ALT-9 - Load state from slot 1-9

SHIFT-1 to SHIFT-9 - Save state to slot 1-9

Command Line

‘-debug’ Start the program in debug mode.

‘-width’ Width to use in windowed mode or desired fullscreen width

‘-height’ Height to use in windowed mode or desired fullscreen height

‘-fullscreen value’ FullScreen: 1 for Yes, 0 for No. Video mode is independant of this setting.

‘-widescreen value’ Widescreen: 1 for Yes, 0 for No. Shows extra pixels on left and right.

‘-zoom value’ Zoom can be 1-3 and the video screen will be scaled by the value.

‘-mouse_speed value’ Mouse Speed can be 1-5 with 3 as the default.

‘-sound value’ Sound: 1 for On, 0 for Off.

‘-throttle value’ Speed throttling in percent (0 for full speed).

‘-start_with_gui value’ Start the emulator with the GUI: 1 for Yes, 0 for No.

‘-start_gui_with_launcher value’ Start the GUI with Launcher: 1 for Yes, 0 for No.

‘-system_type value’ This is PAL or NTSC.

‘-basic_enable value’ Enable BASIC in the 8-bit mode: 1 for Yes, 0 for No.

‘-sio_patch value’ Enable the SIO Patch in the 8-bit mode: 1 for Yes, 0 for No.

‘-machine_type value’ This can be 800/800XL/800XE/5200.

‘-state profile’ This loads up the entered state profile.

‘-quick_state value’ This loads up the quick state, value can be 1-9.

External Links

Official Site